Command Reference Guide

3Com Router 5000 Family and Router 6000 Family voip calledtunnel ● 319
Command Reference
voip calledtunnel
Purpose Use the voip calledtunnel enable command to enable the tunnel function on
the called gateway.
Use the undo voip calledtunnel enable command to disable the tunnel
function on the called gateway.
Syntax voip calledtunnel enable
undo voip calledtunnel enable
Parameters enable
Enables the tunnel function on the called gateway.
Default By default, the tunnel function on the called gateway is enabled.
Example Disable the tunnel function on the called gateway.
[Router-voice] undo voip calledtunnel enable
View This command can be used in the following views:
■ Voice view
Description When the router is a called gateway, it decides whether to use the tunnel function
depending on the configuration of the
voip calledtunnel command. To
interoperate with devices that do not support tunneling using H.323
recommendation, you need to disable with the undo form of this command the
tunnel function on the called gateway.
Related Command tunnel-on