Command Reference Guide

3Com Router 5000 Family and Router 6000 Family vofr jitter-buffer ● 317
Command Reference
vofr jitter-buffer
Purpose Use the vofr jitter-buffer command to configure a jitter buffer length.
Syntax vofr jitter-buffer length
Parameters length
Jitter buffer length. Valid values are 0 to 8. If it is set to
0, jitter buffer will not be used.
If no value is specified, the default jitter buffer length is
0.
Example Set the length of jitter buffer to 5.
[Router-voice] vofr jitter-buffer 5
View This command can be used in the following views:
■ Voice view
Description If delay jitter is serious in voice transmission, setting jitter buffer can smooth such
jitter. However, this undertaking will prolong voice delay. Therefore, the user should
carefully consider the trade-off between delay and delay jitter when setting jitter
buffer length.