Command Reference Guide

3Com Router 5000 Family and Router 6000 Family vi-card reboot ● 313
Command Reference
vi-card reboot
Purpose Use the vi-card reboot command to reboot a voice card.
Syntax vi-card reboot slot-number
Parameters slot-number
Slot number where the voice card is located.
Example Reset the voice card of slot 3.
[Router-voice] vi-card reboot 3
View This command can be used in the following views:
■ Voice view
Description To reset a voice card will interrupt all the service on the voice card, and re-initialize the
card status. Generally, if the voice card works abnormally (e.g. the configuration is
correct but normal connection is not possible), this operation can be used. You can
view the card indicator status when resetting the voice card to judge whether to
perform the reset operation.
First use command display version to display the distributed slots of the voice
cards in the router.
Related Command display version