Command Reference Guide

304 ● type-number 3Com Router 5000 Family and Router 6000 Family
Command Reference
type-number
Purpose Use the type-number command to configure the calling/called number types of
voice entities.
Use the undo type-number command to restore the default number types.
Syntax type-number { called | calling } { abbreviated | international |
national | network | reserved | subscriber | unknown }
undo type-number { called | calling }
Parameters called
Called number.
calling
Calling number.
abbreviated
Abbreviated dial type.
international
International number type.
national
National number type.
network
Special network number type.
reserved
Extension reserved.
subscriber
Subscriber number type.
unknown
Unknown number type.
Default By default, calling/called number types of voice entities are set to unknown.
Example Set the called number of voice entity 10 to national type.
[3Com -voice-dial-entity10] type-number called national
View This command can be used in the following views:
■ Voice Entity view
Description The number types comply with ITU-T Recommendation Q931.