Command Reference Guide

3Com Router 5000 Family and Router 6000 Family trunk-id ● 299
Command Reference
trunk-id
Purpose Use the trunk-id command to configure the number that the local end dials to call
the PSTN side in FRF.11 trunk mode.
Use the undo trunk-id command to restore the local called number to null.
Syntax trunk-id string
undo trunk-id
Parameters string
The number that the local end dials to call the PSTN
side in FRF.11 trunk mode. Valid values are a digit
string of 1 to 31 characters.
Default By default, no number is configured, that is means the parameter string is null.
Example Set the outgoing number to PSTN in VoFR voice entity 2001 to 2001.
[Router-voice-dial-entity1] trunk-id 2001
View This command can be used in the following views:
■ Voice Entity view
Description This command can be used only for the VoFR voice entities in FRF.11 trunk mode.
FRF.11 does not provide end-to-end signaling management leased line. To create a
leased line, the
trunk-id command must be configured.
Related Commands ■ call-mode
■ match-template