Command Reference Guide

3Com Router 5000 Family and Router 6000 Family trace interval ● 295
Command Reference
trace interval
Purpose Use the trace interval command to configure the interval for information
recording in the debugging process, that is, the number of voice packets upon the
pass of which a record will be made.
Use the undo trace interval command to restore the default.
Syntax trace interval packets
undo trace interval
Parameters packets
Number of voice packets. Valid values are 1 to 10000.
If no value is specified, the default is 200.
Example Record debugging information for every 300 voice packets.
[Router-voice] trace interval 300
View This command can be used in the following views:
■ Voice view