Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timer wait-digit ● 291
Command Reference
timer wait-digit
Purpose Use the timer wait-digit command to configure the maximum time duration
that the system waits for a digit.
Use the undo timer wait-digit command to restore the default time settings.
Syntax timer wait-digit { infinity | seconds }
undo timer wait-digit
Parameters infinity
Infinite time.
seconds
The maximum duration waiting for a digit, in the range
3 to 600 seconds. It defaults to 5 seconds. This
argument only applies to analog and digital E&M
interfaces.
Example Set the maximum duration waiting for the first dial on voice line 0/0/0 to 5 seconds.
[Router-voice-line0/0/0] timer wait-digit 5
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command is applied to analog E&M and digital E&M subscriber-lines.
Setting the argument seconds of a timer to 0 will disable this timer.