Command Reference Guide

286 ● timer first-dial 3Com Router 5000 Family and Router 6000 Family
Command Reference
timer first-dial
Purpose Use the timer first-dial command to configure the timer that the system
waiting for a subscriber to dial the first digit.
Use the undo timer first-dial command to restore the default time settings.
Syntax timer first-dial seconds
undo timer first-dial
Parameters seconds
The maximum time waiting for the first dial. Valid
values are 1 to 300 seconds.
If no value is specified, the default
seconds is 10s.
Example Set the maximum duration waiting for the first dial on voice line 0/0/0 to 10 seconds.
[Router-voice-line0/0/0] timer first-dial 10
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command is applied to FXO, FXS subscriber-lines.
Upon the expiration of the timer, the subscriber will be prompted to hook up and the
call is terminated.