Command Reference Guide

284 ● timer dl (R2) 3Com Router 5000 Family and Router 6000 Family
Command Reference
If no value is specified, the default is 1000
milliseconds.
release-guard time
Timeout interval of R2 release guard signal (in
milleseconds). When the originating point sends a
clear-forward signal, the terminating point should send
a release guard signal in the specified time after it
sends back a clear-back signal. Valid values are 100 to
60000 milliseconds.
If no value is specified, the default is 10000
milliseconds.
Example Configure the timeout interval of R2 signaling seizure signal to 300ms.
[Router-cas1/0/0:0] timer dl seize 300
View This command can be used in the following views:
■ R2 CAS view