Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timer-dial-interval ● 281
Command Reference
timer-dial-interval
Purpose Use the timer dial-interval command to configure the timer that the system
waits for a subscriber to dial the next digit.
Use the undo timer dial-interval command to restore the default time
settings.
Syntax timer dial-interval seconds
undo timer dial-interval
Parameters seconds
The maximum interval between two digits. Valid values
are 1 to 300 seconds.
If no value is specified, the default is 10 seconds.
Example Set the maximum duration waiting for the next digit on voice line 0/0/0 to 5 seconds.
[Router-voice-line0/0/0] timer dial-interval 5
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command is applied to FXO, FXS subscriber-lines.
This timer will restart whenever the subscriber dials a digit and will work in this way
until all the digits of the number are dialed. If the timer times out before the dialing is
completed, the subscriber will be prompted to hook up and the call is terminated.
Setting the argument seconds of a timer to 0 will disable this timer.