Command Reference Guide

278 ● substitute outgoing-call 3Com Router 5000 Family and Router 6000 Family
Command Reference
substitute outgoing-call
Purpose Use the substitute outgoing-call command to bind the calling/called
numbers of the outgoing calls from the network side to the number-substitute list.
Use the undo substitute outgoing-call command to cancel the binding.
Syntax substitute outgoing-call { called | calling } list-number
undo substitute outgoing-call { called | calling } { all | list-number
}
Parameters called
Apply the number-substitute rules to the called
number.
calling
Apply the number-substitute rules to the calling
number.
list-number
Serial number of the number-substitute list. Valid
values are 1 to 2147483647.
all
Delete all number-substitute rule lists.
Default By default, no number-substitute list is bound. That means the system does not
substitute any number.
Example Apply number-substitute lists 5, 6, and 8 to the called numbers of the outgoing calls
from the network side.
[3Com -voice-dial] substitute outgoing-call called 5
[3Com -voice-dial] substitute outgoing-call called 6
[3Com -voice-dial] substitute outgoing-call called 8
View This command can be used in the following views:
■ Voice Dial Program view
Description First, you can use the number-substitute list-number command in voice dial
program view to create a number-substitute list, and then use the
rule command to
configure the rules in the list. Second, you can use the
substitute
outgoing-call
command to apply the number-substitute list to the policy of
outgoing calls from the network.
You should follow these rules to use the command:
1. 32 number-substitute lists can be bound at most.