Command Reference Guide

274 ● substitute 3Com Router 5000 Family and Router 6000 Family
Command Reference
substitute
Purpose Use the substitute command to bind the calling/called number-substitute list to
the voice subscriber-line or voice entity.
Use the undo substitute command to delete the calling/called number-substitute
list that is bound to the voice subscriber-line or voice entity.
Syntax substitute { called | calling } list-number
undo substitute { called | calling }
Parameters called
Apply the number-substitute rules to the called
number.
calling
Apply the number-substitute rules to the calling
number.
list-number
Serial number of the number-substitute list. Valid
values are 1 to 2147483647.
Default By default, no number-substitute list is bound to voice subscriber-line or voice entity.
That means the system does not substitute number.
Example Apply called number-substitute list 6 to voice subscriber-line 0/0/0.
[3Com -voice-line0/0/0] substitute called 6
View This command can be used in the following views:
■ Voice Subscriber-Line view
■ Voice Entity View
Description Firstly, you should use the number-substitute list-number command to
configure the number-substitute lists in voice dial program view, and use the
rule
command to configure the rules in the list. Secondly, you should use the
substitute command to apply the number-substitute list to the voice
subscriber-line or voice entity.
According to network requirements, you can complete number –substitute in the
following two ways.
■ Before voice entities are matched, you can use the substitute command in the
voice subscriber-line view to substitute the calling/called numbers corresponding
to the specified subscriber-line.
■ After voice entities are matched and before a call is initiated, you can use the
substitute command in voice entity view to substitute the specified
calling/called numbers.