Command Reference Guide

3Com Router 5000 Family and Router 6000 Family subscriber-line ● 271
Command Reference
subscriber-line
Purpose Use the subscriber-line command to enter FXS, FXO, analog E&M, or digital
E1/T1 voice subscriber-line view.
Syntax subscriber-line line-number
Purpose line-number
Subscriber line number.
Example Enter the view of the voice subscriber line 0/0/0 in voice view.
[GateWay01-voice] subscriber-line 0/0/0
FXO interface encountered
[GateWay01-voice-line0/0/0]
View This command can be used in the following views:
■ Any Voice view Except for Voice Entity view
Description In the view, use subscriber-line command to enter the voice subscriber-line
view. When
line-number is the FXS voice subscriber-line, the system will enter the
FXS voice subscriber-line view. When the
line-number is the analog E&M voice
subscriber-line, the system will enter analog E&M voice subscriber-line view, etc.
Related Command entity