Command Reference Guide

3Com Router 5000 Family and Router 6000 Family slic-gain ● 267
Command Reference
slic-gain
Purpose Use the slic-gain command to configure the output gain of the SLIC chip.
Use the undo slic-gain command to restore the default or 0.
Syntax slic-gain { 0 | 1 }
undo slic-gain
Parameters 0
Sets the output gain of the subscriber line interface
circuit (SLIC) chip to 0.8 dB (the default).
1
Sets the output gain of the SLIC chip to 2.1 dB (the
default).
Example Set SLIC-gain to 1 in analog E&M voice subscriber-line view.
[Router-voice-line1/0/0] slic-gain 1
View This command can be used in the following views:
■ Analog E&M Voice Subscriber-Line view
Description The underlying layer tunes signal gain through the SLIC chip.