Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sip-id ● 265

Command Reference

sip-id

Purpose Use the sip-id command to set ID of the local gateway and configure its SIP

authentication password.

Use the undo sip-id command to restore the default.

Syntax sip-id id password { simple | cipher } password

undo sip-id

Parameters id

SIP ID of router, which is a case sensitive character

string in the range 1 to 31 and defaults to

VRP-GATEWAY.

simple

Displays the configuration of SIP-ID password in plain

text.

cipher

Displays the configuration of SIP-ID password in

ciphertext.

password

SIP authentication password of the gateway, which

defaults to VRP-SIP.

Default By default, SIP ID of gateway is VRP-GATEWAY and authentication password is

VRP-SIP.

Example Set SIP ID of the router to 3Com, password to 1234, and display mode to ciphertext.

[Router-voice-sip] sip-id 3Com password cipher 1234

View This command can be used in the following views:

■ SIP Client view

Description During the SIP message interaction, the local device may be required by the remote

SIP device to provide SIP ID and password for authentication. You can use this

command however only when the

configured.