Command Reference Guide

3Com Router 5000 Family and Router 6000 Family send-ring ● 255
Command Reference
send-ring
Purpose Use the send-ring command to enable the local end to play ringback tone.
Use the undo send-ring command to disable the local end to play ringback tone.
Syntax send-ring
undo send-ring
Parameters None
Default By default, the local end does not play ringback tone.
Example Enable the local end to play ringback tone.
[Router-voice-dial-entity8801] fast-connect
[Router-voice-dial-entity8801] send-ring
View This command can be used in the following views:
■ VoIP Voice Entity view
Description This configuration takes effect only in fast-connect mode.