Command Reference Guide

252 ● send-busytone 3Com Router 5000 Family and Router 6000 Family
Command Reference
send-busytone
Purpose Use the send-busytone command to enable busy tone sending on the FXO
interface.
Use the undo send-busytone command to disable busy tone sending on the FXO
interface.
Syntax send-busytone { enable | time seconds }
undo send-busytone { enable | time }
Parameters enable
Enables busy-tone sending on the FXO interface.
time seconds
Duration of busy tone, in the range 2 to 15 seconds. It
defaults to 3 seconds. This parameter is not available
when busy-tone sending is disabled.
Default By default, busy tone sending is disabled.
Example Enable FXO interface 1/0/0 to send busy tone that lasts 5 seconds.
[Router-voice] subscriber-line 3/1
FXO interface encountered
[Router-voice-line3/1] send-busytone enable
[Router-voice-line3/1] send-busytone time 5
View This command can be used in the following views:
■ FXO Voice Subscriber-Line view
Description This command is valid only on FXO interfaces.