Command Reference Guide

3Com Router 5000 Family and Router 6000 Family select-rule type-first ● 249
Command Reference
select-rule type-first
Purpose Use the select-rule type-first command to configure the type-first select
rules for voice entities.
Use the undo select-rule type-first command to delete the type-first
select rules.
Syntax select-rule type-first 1st-type 2nd-type 3rd-type
undo select-rule type-first
Parameters 1st-type
Serial number of the type of the first priority. Valid
values are 1 to 3. The meanings of the serial numbers
are shown in the following table.
2nd-type
Serial number of the type of the second priority. Valid
values are 1 to 3. It cannot be the same number as
1st-type.
3rd-type
Serial number of the type of the third priority. Valid
values are 1 to 3. It cannot be the same number as
1st-type or 2nd-type.
Default By default, voice entities are not selected according to their types.
Example Configure to select voice entities according to the type-first rules: VoIP-> POTS ->
VoFR.
[3Com -voice-dial] select-rule type-first 2 1 3
View This command can be used in the following views:
■ Voice Dial Program view
Description The command is used to configure the select order for voice entities according to their
types. If multiple voice entities (of different types) are qualified for a call connection,
the system will select a suitable voice entity according to the type-first rules
configured by the
select-rule type-first command. The order of inputting
the parameters determines voice entity type priorities. The system selects the first type
first and then the third type last.
Table 1 Meaning of the serial numbers
Serial Number Meaning
1 VoIP voice entity
2 POTS voice entity
3 VoFR voice entity