Command Reference Guide

248 ● select-rule search-stop 3Com Router 5000 Family and Router 6000 Family
Command Reference
select-rule search-stop
Purpose Use the select-rule search-stop command to configure the maximum
number of voice entities found.
Use the undo select-rule search-stop command to cancel the limitation on
the search for voice entities.
Syntax select-rule search-stop max-number
undo select-rule search-stop
Parameters max-number
Maximum number of voice entities found. Valid values
are 1 to 400.
Default By default, no maximum number is configured to the search for voice entities. That
means there is no limitation on the search for voice entities.
Example Configure to search 5 voice entities at most.
[3Com -voice-dial] select-rule search-stop 5
View This command can be used in the following views:
■ Voice Dial Program view
Description There might be multiple voice entities that meet the call requirements during call
connection. If a voice entity fails, the system can search for other qualified ones and
continue the call. The
select-rule search-stop command is used to define
the maximum number of qualified voice entities to be found before the search stops.
If there are multiple qualified voice entities, only the one of the highest priority is used
to initiate a call.
Related Commands ■ select-rule rule-order
■ select-rule type-first