Command Reference Guide
246 ● select-rule rule-order 3Com Router 5000 Family and Router 6000 Family
Command Reference
select-rule rule-order
Purpose Use the select-rule rule-order command to configure the select rule of voice
entities.
Use the undo select-rule rule-order command to restore the default value.
Syntax select-rule rule-order 1 [ 2 [ 3 ] [ 4 ]]
undo select-rule rule-order
Parameters The following lists the meanings of the serial numbers.
Default By default, the order of voice entity select rules is 1->2->3. That means exact match
first, voice entity priority second, and random select last.
Example Set the select rule of voice entities to exact match-> priority-> longest unused.
[3Com -voice-dial] select-rule rule-order 1 2 4
View This command can be used in the following views:
■ Voice Dial Program view
Description Use the select-rule rule-order command to configure three rules of
different priorities at most. But you cannot configure the same rules. Order of
priorities is the order of select rules. If there are rules of multiple priorities, the system
first select voice entities according to the rule of first priority. If that rule cannot
distinguish the priorities of the voice entities, the rule of second priority will be used.
The rule of third priority will be used for the voice entities that cannot be
distinguished by the first and second rules, and so on. If all the rules cannot
distinguish voice entity priorities, Identifiers of voice entities are used for selection,
and the voice entity with the smallest identifier will be preferred.
The select rules are described in the following:
1. Exact match. From left to right, the more digits it matches, the better the precision
is. The system stops using the rule once it meets a digit that cannot be matched
uniquely.
Table 1 Meanings of the serial numbers
Serial Number Meaning
1 Exact match
2 Priority
3 Random select
4 Longest unused