Command Reference Guide

3Com Router 5000 Family and Router 6000 Family selectlanguage ● 243
Command Reference
selectlanguage
Purpose Use the selectlanguage command to enable or disable the voice gateway to play
the prompt language selection message in the voice caller number process. This
command only applies to the voice caller number process.
Syntax selectlanguage { disable | enable }
Parameters disable
Disables language selection.
enable
Enables language selection.
Default By default, language selection is disabled.
Example Disable prompt language selection.
[Router-voice-dial-anum163] selectlanguage disable
Enable prompt language selection.
[Router-voice-dial-anum163] selectlanguage enable
View This command can be used in the following views:
■ Voice Access-Number view
Description With language selection enabled, the voice gateway plays a message asking the user
to select a prompt language and then to input the called number. If language
selection is disabled, the called number input prompt is played in Chinese after
authentication.