Command Reference Guide
238 ● ring-generate 3Com Router 5000 Family and Router 6000 Family
Command Reference
ring-generate
Purpose Use the ring-generate command to configure the gateway at the called side to
give a ringback tone when in quick start mode.
Use the ring-generate command to remove the configuration and then the
ringback tone generated by the switch will be transmitted transparently.
Syntax ring-generate
undo ring-generate
Parameters None
Default By default, the gateway at the called side gives a ringback tone when in quick start
mode.
Example Configure the gateway at the called side to give a ringback tone when in quick start
mode.
[Router-voice-line2/0:2] undo ring-generate
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description FXS subscriber-lines do not support this function.