Command Reference Guide

3Com Router 5000 Family and Router 6000 Family register-number ● 221

Command Reference

Purpose Use the register-number command to enable the gateway (the VoIP-enabled

router) to register the number of the voice entity with the H.323 gatekeeper or SIP

server.

Use the undo register-number command to disable the gateway to register the

number of the voice entity when registering with the H.323 gatekeeper or SIP server.

Syntax register-number

undo register-number

Parameters None

Default By default, the number of the voice entity is registered.

Example Disable the gateway to register the number of voice entity 1.

[Router-voice-dial-entity1] undo register-number

View This command can be used in the following views:

■ Voice Entity view

Description This command is only applicable to the configurations of POTS voice entities.

You need to use the undo register-number command to disable the gateway

to register the numbers of some voice entities with a gatekeeper or SIP server in the

situations where:

■ POTS entities with the same number exist on multiple gateways on the same

network. But for their gatekeeper or SIP server, the number of a POTS entity must

be unique. Therefore, those POTS entities cannot register with the gatekeeper or

SIP server at the same time.

■ The user needs to register the numbers of some ports with the gatekeeper or SIP

server but not the numbers of others for special purposes.

CAUTION:

After configuring this command, use the ras-on command in GK-client view or the

gatekeeper or SIP server to make the configuration effective.

Related Command match-template