Command Reference Guide

220 ● register-enable 3Com Router 5000 Family and Router 6000 Family

Command Reference

Purpose Use the register-enable command to enable or disable the SIP registration

function.

Syntax register-enable { on | off }

undo register-enable

Parameters on

Enables the SIG registration function.

off

Disables the SIG registration function.

Default By default, the SIP registration function is not enabled.

Example Enable the SIP registration function.

[Router-voice-sip] register-enable on

View This command can be used in the following views:

■ SIP Client view

Description You can disable the SIP registration function by executing either undo