Command Reference Guide

3Com Router 5000 Family and Router 6000 Family process-config ● 215
Command Reference
With VRP, three dial processes are available: calling number process, card number
process, and voice caller number process.
■ Caller number process: It is actually the caller number authentication process,
which is the authentication, authorization and accounting process carried out
according to the caller number of the user. The caller number process does not
require further parameter setting in the process.
■ Voice caller number process: uses calling numbers for authentication. After a user
dials the access number, the voice gateway plays voice messages to prompt the
user to select prompt language and dial the called number. This is different from
the caller number process where the voice gateway displays only dial tone (long
tone) after a user dials the access number.
■ Card number process: As its name implies, the user should dial its own card
number and password to complete the authentication process after dialing an
access service number, and he cannot dial the called number to set up a call until it
is authenticated. The parameters in a card number process can be set through the
such commands as card-digit, password-digit and redialtimes.
Related Commands ■ gw-access-number
■ card-digit
■ password-digit
■ redialtimes