Command Reference Guide

3Com Router 5000 Family and Router 6000 Family priority ● 211
Command Reference
priority
Purpose Use the priority command to configure the priority levels for voice entities.
Use the undo priority command to restore the default priority level.
Syntax priority priority-order
undo priority
Parameters priority-order
Priority of a voice entity. Valid values are 0 to 10. The
smaller the number is, the higher the priority is. That
means 0 is the highest priority and 10 is the lowest
priority.
Default By default, the priority level is set to 0.
Example Set the priority level of voice entity 10 to 5.
[3Com -voice-dial-entity10] priority 5
View This command can be used in the following views:
■ Voice Entity view
Description If you have configured priority levels for voice entities and have configured priority in
voice entity select rule (see select-rule), the system will first select the voice entity of
the highest priority when it initiates a call. If the voice entity of the highest priority
fails, it will try those of lower priority levels to initiate the call.