Command Reference Guide

208 ● plc-mode 3Com Router 5000 Family and Router 6000 Family
Command Reference
plc-mode
Purpose Use the plc-mode command to configure packet loss compensation mode.
Use the undo plc-mode command to restore the default packet loss compensation
mode.
Syntax plc-mode { general | specific }
undo plc-mode
Parameters general
Uses the universal frame erasure algorithm.
specific
Uses the specific algorithm provided by the voice
gateway.
Default By default, the specific algorithm is used.
Example Configure the voice gateway to use the universal packet loss compensation
algorithm.
[VG-voice-line0] plc-mode general
View This command can be used in the following views:
■ Voice Subscriber-Line view
Description This command takes effect only on FXO and FXS interfaces.