Command Reference Guide

3Com Router 5000 Family and Router 6000 Family plan-numbering ● 207
Command Reference
plan-numbering
Purpose Use the plan-numbering command to configure the calling/called numbering plan
attribute of voice entities.
Use the undo plan-numbering command to restore the default numbering plan.
Syntax plan-numbering { called | calling } { data | isdn | national | private |
reserved | telex | unknown }
undo plan-numbering { called | calling }
Parameters called
Called number.
calling
Calling number.
data
Data numbering plan.
isdn
Numbering plan of ISDN telephone.
national
Numbering plan of national standard.
private
Private numbering plan.
reserved
Reserved extension.
telex
Subscriber telex numbering plan
unknown
Unknown numbering plan.
Default By default, the calling/called numbering plan of a voice entity is set to unknown.
Example Set the called numbering plan of voice entity 10 to national.
[3Com -voice-dial-entity10] plan-numbering called national
View This command can be used in the following views:
■ Voice Entity view
Description The numbering plans comply with ITU-T Recommendation Q931.
Related Command type-number