Command Reference Guide

204 ● payload-size 3Com Router 5000 Family and Router 6000 Family
Command Reference
payload-size
Purpose Use the payload-size command to notify the underlying layer how much time
DSP spends assembling a voice packet, or the time length of each voice packet.
Use the undo payload-size command to restore the default.
Syntax payload-size { g711 | g723 | g726r16 | g726r24 | g726r32 | g726r40 |
g729 } time-length
undo payload-size { g711 | g723 | g726r16 | g726r24 | g726r32 | g726r40
| g729 }
Parameters g711
Specifies the time length of voice packets with g711
coding (g711alaw or g711ulaw). Valid values are 10 to
30 milliseconds.
If no value is specified, the default is 20 milliseconds.
g723
Specifies the time length of voice packets with g723
coding (g723r53 or g723r63). Valid values are 30 to
180 milliseconds.
If no value is specified, the default is 30 milliseconds.
g726r16
Specifies the time length of voice packets with
g726r16 coding. Valid values are 10 to 110
milliseconds.
If no value is specified, the default is 30 milliseconds.
g726r24
Specifies the time length of voice packets with
g726r24 coding.Valid values are 10 to 70 milliseconds.
If no value is specified, the default is 30 milliseconds.
g726r32
Specifies the time length of voice packets with
g726r32 coding. Valid values are 10 to 50
milliseconds.
If no value is specified, the default is 30 milliseconds.
g726r40
Specifies the time length of voice packets with
g726r40 coding. Valid values are 10 to 40
milliseconds.
If no value is specified, the default is 30 milliseconds.
g729
Specifies the time length of voice packets with g729
coding (g729r8 or g729a). Valid values are 20 to 180
milliseconds.
If no value is specified, the default is 30 milliseconds.
time-length
Duration for DSP to assemble a packet in the
corresponding codec mode.
Example Set the time that DSP spends assembling a voice packet in g711 mode to 30
milliseconds for voice entity 8801.
[route-voice-dial-entity8801] payload-size g711 30