Command Reference Guide

198 ● number-match 3Com Router 5000 Family and Router 6000 Family
Command Reference
number-match
Purpose Use the number-match command to configure a global number match-policy.
Use the undo number-match command to restore the default.
Syntax number-match { longest | shortest }
undo number-match
Parameters longest
Indicate to perform the match according to the longest
number.
shortest
Indicate to perform the match according to the
shortest number.
Default By default, match according to the shortest number.
Example Configure that the number match is performed according to the longest number.
[Router-voice-dial] number-match longest
View This command can be used in the following views:
■ Voice Dial Program view
Description Command number-match is used to decide if the match is performed according to
the longest or the shortest number for the number match. For instance,
match-template 0106688 and match-template 01066880011 are respectively
configured in two voice entities.
When the user dials 01066880011, if the router is configured with the shortest
number match-policy, then the router originates a connection to 0106688 at the
remote end, and the four numbers 0011 will not be processed; if the router is
configured with the longest number match-policy, and the user only dials 0106688,
the router will wait for the user to dial. After timeout, the number match-policy
configured with the system is neglected, and the shortest number match-policy will
be automatically followed to make a call; if the user dials 0106688# (here the "#”
represents the dial terminator configured by the system), the router will likewise
neglect the number match-policy configured by the system and use the shortest
number match-policy, thus providing a greater flexibility for the configuration of user
dial scheme.
Related Command match-template