Command Reference Guide

240 ● ntp-service authentication-keyid 3Com Router 5000 Family and Router 6000 Family
Command Reference
ntp-service authentication-keyid
Purpose Use the ntp-service authentication-keyid command to set an NTP
authentication key.
Use the undo ntp-service authentication-keyid command to cancel the
NTP authentication key.
Syntax ntp-service authentication-keyid number authentication-mode md5 value
undo ntp-service authentication-keyid number
Parameters number
Key ID. Valid values are 1 to 4294967295.
value
The key, which comprises 1 to 32 ASCII characters.
Default By default, no authentication key is configured.
Example Set MD5 ID authentication key: the key ID number is 10 and the key is BetterKey.
[3Com] ntp-service authentication-keyid 10 authentication-mode md5
BetterKey
View This command can be used in the following views:
■ System view
Description This command only supports MD5 authentication.