Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mode (SIP Client view) ● 193
Command Reference
mode (SIP Client view)
Purpose Use the mode command to set the registration mode of the gateway.
Use the
undo mode command to restore the default registration mode, or the
gateway mode.
Syntax mode {gateway { all | single } | phone number number }
undo mode
Parameters gateway
sets the registration mode of the gateway to gateway.
all
All telephone numbers are carried in one register
message.
single
One telephone number is carried in one register
message.
phone
sets the registration mode of the gateway to phone.
number number
the number to be registered in phone mode.
Example Set the gateway registration mode to phone and the number to be registered to
1688.
[Router] mode phone number 1688
View This command can be used in the following views:
■ SIP Client view
Description In gateway mode, the router can register multiple numbers while in phone mode it
can register only the one specified by the
number argument.