Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mode ● 191
Command Reference
mode
Purpose Use the mode command to configure the R2 signaling mode in a country or region.
Use the
undo mode command to restore the default, as you would with the mode
itu-t default-standard
command.
Syntax mode zone-name [ default-standard ]
undo mode
Parameters zone-name
Name of the country or region. By default, it is set to
the mode of ITU-T. It can be:
■ argentina: Uses Argentinean R2 signaling
standard.
■ australia: Uses Australian R2 signaling standard.
■ china: Uses Chinese R2 signaling standard.
■ bengal: Uses Bengalee R2 signaling standard.
■ brazil: Uses Brazilian R2 signaling standard.
■ custom: Uses the R2 signaling mode defined by
customer.
■ hongkong: Uses Hongkong R2 signaling standard.
■ india: Uses Indian R2 signaling standard.
■ indonesia: Uses Indonesian R2 signaling standard.
■ itu-t: Uses ITU-T R2 signaling standard.
■ korea: Uses Korean R2 signaling standard.
■ malaysia: Uses Malaysian R2 signaling standard.
■ mexico: Uses Mexican R2 signaling standard.
■ newzealand: Uses New Zealand R2 signaling
standard.
■ singapore: Uses Singaporean R2 signaling
standard.
■ thailand: Uses Thai R2 signaling standard.
default-standard
Initializes the related parameters of R2 signaling
according to the mode in the current country, that is,
initializes the values of the sense and force-metering
commands.
Default The default R2 signaling mode is ITU-T mode.