Command Reference Guide

3Com Router 5000 Family and Router 6000 Family max-call (in Voice Entity View) ● 189
Command Reference
max-call (in Voice Entity View)
Purpose Use the max-call command to bind a voice entity to the max-call set specified by
set-number.
Use the
undo max-call command to delete the binding. Each voice entity can only
be bound to one max-call set, but you can change the binding.
This command is used with the
max-call command in voice dial program view: the
max-call command in voice dial program view sets the serial number of max-call
set and the maximum number of call connections; this command binds the voice
entity to the max-call set with the serial number.
Syntax max-call set-number
undo max-call
Parameters set-number
Specify a max-call set. Its value ranges from 1 to
2147483647.
Default By default, no max-call set is bound. That means there is no limitation on the number
of call connections.
Example Bind voice entity 10 to max-call set 1.
[3Com -voice-dial-entity10] max-call 1
View This command can be used in the following views:
■ Voice Entity view
Related Command max-call (in Voice Dial Program View)