Command Reference Guide

3Com Router 5000 Family and Router 6000 Family gw-id ● 177
Command Reference
gw-id
Purpose Use the gw-id command to configure the gateway alias.
Use the
undo gw-id command to cancel the alias of the specified gateway.
Use the command
gw-id to configure the gateway alias, which is used for the
gateway to register and identify the voice gateway. Each gateway has only one alias,
and the new alias will cover the old one.
Syntax gw-id namestring
undo gw-id
Parameters namestring
Gateway alias (gateway ID), a string of 1 to 128 case
sensitive characters.
Default By default, the gateway alias is empty, i.e., the interface alias is not configured.
Example Configure the gateway alias as beijing-gw.
[Router-voice-gk] gw-id beijing-gw
View This command can be used in the following views:
■ Voice GK Client view
Related Command ■ area-id (Voice GK Client view)
■ gk-2nd-id
■ gk-id
■ gw-address
■ ras-on