Command Reference Guide

176 ● gw-address 3Com Router 5000 Family and Router 6000 Family
Command Reference
gw-address
Purpose Use the gw-address command to configure the source IP address used by the voice
gateway.
Use the
undo gw-address command to cancel the source IP address used by the
voice gateway.
Syntax gw-address ip-address
undo gw-address
Parameters ip-address
The source address of gateway.
Default By default, the source IP address used by the voice gateway is not configured.
Example Configure the source IP address used by the voice gateway as 1.1.1.1.
[Router-voice-gk] gw-address 1.1.1.1
View This command can be used in the following views:
■ Voice GK Client view
Description CAUTION:
This command takes effect immediately after it is configured, disregarding whether
the GK client has been enabled (using the
ras-on command) or not.
Related Commands ■ area-id (Voice GK Client view)
■ gk-2nd-id
■ gk-id
■ gw-address
■ ras-on