Command Reference Guide

3Com Router 5000 Family and Router 6000 Family gk-2nd-id ● 171
Command Reference
gk-2nd-id
Purpose Use the gk-2nd-id command to configure the name and IP address of the backup
GK Server corresponding to the gateway.
Use the
undo gk-2nd-id command to cancel the name and IP address of the
backup GK Server corresponding to the gateway.
Use the
gk-2nd-id command to configure the IP address, name and port of the
backup GK Server.
Syntax gk-2nd-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-2nd-id
Parameters Refer to the parameters of the gk-id command.
Example Configure the backup GK Server as follows: The IP address is 1.1.1.2, the name is
"gk-backup", and use the default port.
[Router-voice-gk] gk-id gk-center gk-addr 1.1.1.1
[Router-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2
View This command can be used in the following views:
■ Voice GK Client view
Description When the communication between the GK Client and the master GK Server is
abnormal (e.g. timeout) or the master GK Server fails, the 3Com router can also send
registration requests to the backup GK Server.
The gk-id command must be used first to configure the name and address of the
master GK Server, before those of the backup GK Server can be configured.
Related Command gk-id