Command Reference Guide

170 ● gk-id 3Com Router 5000 Family and Router 6000 Family
Command Reference
gk-id
Purpose Use the gk-id command to configure the GK Server name and IP address
corresponding to the gateway.
Use the
undo gk-id command to cancel the GK Server name and IP address
corresponding to the gateway.
Use the command
gk-id to configure such information as the IP address, name,
and port of GK Server to facilitate the research for the right GK Server equipment by
the GK Client according to this information, so as to implement the register task of
gateway in the GK Server.
Syntax gk-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-id
Parameters gk-name
GK Server name, a string of 1 to 128 case sensitive
characters.
gk-ipaddress
IP address of the GK Server.
ras-port
RAS communication port of GK Server, with the value
range being the integer between 1 and 65535. By
default
ras-port is 1719.
Example Configure the IP address of the GK Server as 1.1.1.1, name as gk-center, port as the
default.
[Router-voice-gk] gk-id gk-center gk-addr 1.1.1.1
View This command can be used in the following views:
■ Voice GK client view
Related Command ■ area-id (Voice GK Client view)
■ gw-id
■ gk-2nd-id
■ gw-address
■ ras-on