Command Reference Guide

3Com Router 5000 Family and Router 6000 Family fxo-monitoring ● 167
Command Reference
fxo-monitoring
Purpose Use the fxo-monitoring enable command to enable the on line monitoring function
on all FXO interfaces of the device.
Use the undo fxo-monitoring enable command to disable the on line monitoring
function on all FXO interfaces of the device.
Syntax fxo-monitoring enable
undo fxo-monitoring enable
Parameters None.
Default By default, the fxo-monitoring enable command is used to enable on line monitoring
function of FXO interfaces.
Example Disable on line monitoring function on all FXO interfaces.
[Router-voice] undo fxo-monitoring enable
View This command can be used in the following views:
■ Voice view
Description The command is only valid for FXO interfaces. Cpld 3.0 and its later versions support
the command.
When the on line monitoring function is enabled, FXO circuit board system monitors
the on line status of FXO interfaces on real time.