Command Reference Guide

3Com Router 5000 Family and Router 6000 Family first-rule ● 165
Command Reference
first-rule
Purpose Use the first-rule command to configure the number-substitute rule that is first
used in the current number-substitute list.
Use the
undo first-rule command to restore the default number-substitute rule.
Syntax first-rule rule-number
undo first-rule
Parameters rule-number
Serial numbers of the number-substitute rules, ranging
from 0 to 127.
Default By default, the configured rule with the smallest serial number is used first.
Example Set rule 4 as the first-used rule in number-substitute list 20.
[3Com -voice-dial] number-substitute 20
[3Com -voice-dial-substitute20] rule 4 663 3
[Router-voice-dial-substitute20] first-rule 4
View This command can be used in the following views:
■ Voice Number-Substitute view
Description In a voice call, the system first uses the rule that is defined by the first-rule
command when it begins to use the number-substitute rules. If this rule fails, it will try
all other rules in order, till it finds the one that works or till it confirms all the rules do
not work.