Command Reference Guide

162 ● fax support-mode 3Com Router 5000 Family and Router 6000 Family
Command Reference
fax support-mode
Purpose Use the fax support-mode command to configure the fax interworking mode
with other equipments.
Use the
undo fax support-mode command to restore the fax interworking mode
with other equipment to its default.
Syntax fax support-mode { rtp | vt | sip-udp }
undo fax support-mode
Parameters rtp
RTP mode.
vt
VT mode, the mode when interworking with the
VocalTec gateway.
sip-udp
Specifies SIP UDP mode.
Default By default, the RTP mode is adopted.
Example Configure the mode when interworking with VocalTec device to vt.
[Router-voice-dial-entity1] fax support-mode vt
View This command can be used in the following views:
■ Voice Entity view
Description Use the fax support-mode command to configure the fax interworking mode
with other equipments.
Use the undo fax support-mode command to restore the fax interworking mode
with other equipment to its default.
This command is only applied to IP Fax.
Under common conditions, use the rtp mode. When interworking with the VocalTec
gateway, the vt mode is adopted.