Command Reference Guide

158 ● fax local-train threshold 3Com Router 5000 Family and Router 6000 Family
Command Reference
fax local-train threshold
Purpose Use the fax local-train command to configure the percentage of fax local
training threshold value.
Use the
undo fax local-train command to restore the default value.
Syntax fax local-train threshold threshold
undo fax local-train threshold
Parameters threshold
The percentage of local training threshold value,
ranging 0 to 100. By default threshold is 15.
Example Configure the percentage of fax local training threshold to 20.
[Router-voice-dial-entity1] fax local-train threshold 20
View This command can be used in the following views:
■ Voice Entity view
Description This command can be applied to IP Fax and Frame Relay Fax.
When rate training is being carried on between facsimile terminals, the transmitting
facsimile terminal transmits the “0” TCF data at 1.5s±10% to the receiving facsimile
terminal, and the receiving facsimile terminal decides whether or not the rate is
acceptable according to the TCF data received.
The command is used to configure the percentage of local training threshold value if
the local training mode is configured. Error happens during the TCF transmission if
the percentage of the number of "1" received in proportion to the whole TCF data is
less than the
threshold value configured, the transmission is successful; otherwise,
it is unsuccessful.