Command Reference Guide

152 ● entity 3Com Router 5000 Family and Router 6000 Family
Command Reference
entity
Purpose Use the entity command to configure a voice entity and enter its view (at the same
time specify the working mode related to voice).
Use the
undo entity command to cancel an existing voice entity.
In a global view, use the
entity command to enter a Voice entity view, and use quit
to return to the dial program view.
Syntax entity entity-number { voip | pots | vofr }
undo entity { entity-number | all | voip | pots | vofr }
Parameters entity-number
Identify a voice entity, The value range is from 1 to
2147483647.
all
All dial program entities.
voip
Key character, indicating that this subscriber-line is a
network subscriber-line.
pots
Key character, indicating that this subscriber-line is an
often used telephone subscriber-line.
Example Create and enter the Voice entity view to configure a POTS voice entity whose
identification is 10.
[Router-voice] dial-program
[Router-voice-dial] entity 10 pots
View This command can be used in the following views:
■ Voice Dial Program view
Description The entity-number assigned to a VoIP or POTS entity must be unique among all VoIP
and POTS entities.
Related Command line.