Command Reference Guide

148 ● effect-time 3Com Router 5000 Family and Router 6000 Family
Command Reference
effect-time
Purpose Use the effect-time command to configure the debounce time of line signaling.
Use the
undo effect-time command to restore the default.
Syntax effect-time time
undo effect-time
Parameters time
The lower threshold of the debounce time of line
signaling, in the range 10 to 40 milliseconds. It
defaults to 10 milliseconds.
Example Set the debounce time of line signaling to 20 milliseconds for timeslot set 3 on the E1
subscriber-line 1/0/0.
[Router-cas1/0/0:3] effect-time 20
View This command can be used in the following views:
■ R2 CAS view
Description Use the effect-time command to configure the debounce time of line signaling.
Use the undo effect-time command to restore the default.
This command applies to E1 voice only.
The change of the line is regarded valid only when the duration of line signaling
exceeds this threshold.
Related Commands ■ timeslot-set
■ pri-set