Command Reference Guide

136 ● dl-bits 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ R2 CAS view
Description Use the dl-bits command to configure the bit value of all the signals of R2 line
signaling.
Use the undo dl-bits command to restore the values to defaults.
This command applies to E1 voice only.
You can use the dl-bits command to configure the ABCD bits value of R2 signaling
for different coding schemes in different countries.
Related Commands ■ seizure-ack {enable/disable}
■ answer {enable/disable}