Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice voip data-statistic ● 131
Command Reference
display voice voip data-statistic
Purpose Use the display voice voip data-statistic command to view statistics
information of voice data.
This command is used to display the following information: time for successfully
searching the voice table, total number of received data packets, time for searching
the table in fast and common modes and voice and fax of receive and transmit
channels etc. Used with the
verbose keyword, this command displays detailed
information of receive and send channels (including detailed input/output statistics
and jitter Buffer of information packets).
Syntax display voice voip data-statistic { brief | channel channel-number ] |
verbose }
Parameters channel channel-number
Display statistics information of voice data on specified
channel,
channel-number is the logical channel
number of voice, which accumulates from 0. The
channel for 2VI and 4VI modularized card is numbered
first and then E1V1 modularized card.
verbose
Display detailed information of logical channel of
voice.
Example Display the statistics information of voice data.
[Router] display voice voip data-statistic
=== VoIP datagram summary ===
--------------------------------------------------------------------
[NET] SearchVoiceTableSuccess : 0
[NET] ReceiveDatagramTotal : 0
[NET] FastSearchTableTimes : 0
[NET] NormalSearchTableTimes : 0
------------------------ Receive channel: 000 ----------------------
[NET] ReceiveDatagramTotal : 0
[COM] DiscardDatagramTotal : 0
[NET] ReceiveRtpDatagram : 0
[NET] ReceiveRtcpDatagram : 0
[COM] AddReceiveTable : 3
[COM] ClearReceiveTable : 0
[COM] FreeReceiveBuffer : 0
[COM] TrsmitDone : 462
VOICE DATA INFORMATION:
[NET] ReceiveDataTotal : 0
[NET] NormalProcessData : 0
FAX DATA INFORMATION:
[NET] ReceiveDataTotal : 0
[NET] NormalProcessData : 0
------------------------ Send channel: 000 ----------------------
COMMON INFORMATION:
[VPP] LinkReceiveDataTotal : 484