Command Reference Guide

130 ● display voice voip 3Com Router 5000 Family and Router 6000 Family
Command Reference
display voice voip
Purpose This command applies to E1 and T1 voice.
The command
display voice voip downqueue e1t1vi-bno displays the
contents of the down interrupt queue between the E1/T1 voice card and the router
main card.
The command
display voice voip up-queue e1t1vi-no displays the
contents of the up interrupt queue between the E1/T1 voice card and the router main
card.
The command
display voice voip phy-statistic e1t1vi-bno displays
the statistics of the physical layer.
Syntax display voice voip { down-queue e1t1vi-no | phy-statistic e1t1vi-no |
up-queue e1t1vi-no | memory | data-statistic }
Parameters e1t1vi-no
Indicate the card number of the E1/T1 voice card.
Example Display the contents of the down interrupt queue between the E1/T1 voice card and
the router main card.
[Router] display voice voip down-queue 5
V = 0,I = 0,P = 0,C = 0,E = E1/T1VI_NULL_EVENT, B = 0
V = 0,I = 1,P = 0,C = 0,E = E1/T1VI_NULL_EVENT, B = 0
V = 0,I = 2,P = 0,C = 0,E = E1/T1VI_NULL_EVENT, B = 0
……
V = 0,I = 255,P = 0,C = 0,E = E1/T1VI_NULL_EVENT, B = 0
E1VI board 0 down interrupt queue is empty :
View This command can be used in the following views:
■ Any view
Table 1 Field description of the down interrupt queue between the E1/T1 voice card and the
router main card.
Field Description
V Value flag of interrupt
I Sequence number of interrupt down-queue
P Port number of E1VI board
C Channel number of E1VI board
E Type of event
B Flag of queue ending
E1VI board 0 down
interrupt queue is empty
Interrupt down-queue of E1VI board is empty