Command Reference Guide

126 ● display voice vofr call 3Com Router 5000 Family and Router 6000 Family
Command Reference
display voice vofr call
Purpose Use the display voice vofr call command to view information of the
current call.
This command is used to display the information of incoming and outgoing call
control blocks, the connection state of the modules, call state, calling number, called
number, etc.
Syntax display voice vofr call [ channel ]
Parameters channel
VPU channel number.
Example Display the information of the current call.
[Router] display voice vofr call
CCB VCC CRV: 0
VOFR CRV: 0
Call Protocol: frf11 trunk
Status: idle
Call Mode: idle
Call Attrib: normal
Release Type:
Fr Release Type:
Timer: 0
FREX CCXID: 16181204
VPU Channel:
Dialpeer Line Number: 103
Voice Bandwidth: 0
Packet Size: 30
Encode Type: G729R8
Decode Type: G729R8
DTMF-Relay: disable
Voice Vad Mode: no
Use Sequence: no
Use TimeStamp: no
Caller Number:
Called Number: 102
Voice Packet Time: 0
Run Mode: idle
Fax Is Running: no
Max Fax Transmit rate: voice
Fax Start Mode: passive
Fax trainning result: 0
Fax Send NSF: no
Switch Timer: 0
ID of Fax Start Tone: 0
Threshold of TCF error: 10
Fax Tx carrier power in db: 15
Packet number in Fax data buffer: 0
Fax Release Reason:
Fax Bandwidth: 0