Command Reference Guide

3Com Router 5000 Family and Router 6000 Family modem ● 233
Command Reference
modem
Purpose Use the modem or modem both command to allow modem calls to pass through,
both incoming and outgoing.
Use the modem [ call-in | call-out ] command to allow incoming or outgoing
modem calls to pass through.
Use the undo modem or undo modem both command to disable modem calls to
pass through, both incoming and outgoing.
Use the undo modem [ call-in | call-out ] command to disable incoming or
outgoing modem calls to pass through.
Syntax modem [ call-in | both | call-out ]
undo modem [ call-in | both ]
Parameters both
Allows both incoming and outgoing calls.
call-in
Allows incoming calls.
call-out
Allows outgoing calls.
Default By default, both incoming and outgoing modem calls are disabled to pass through.
Example Set the modem call attribute on TTY 1.
[3Com-ui-tty1] modem
View This command can be used in the following views:
■ User Interface view
Description This command is only available with the AUX interface and other asynchronous
interfaces (TTYs). You cannot use it on the console interface.