Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display voice vcc ● 123
Command Reference
display voice vcc
Purpose Use the display voice vcc command to view the information about the call
channel status and call statistics.
Syntax display voice vcc { channel [ line-number ] } | { statistic { all |
error | ipp | proc | rcv | timer | vpp } }
Parameters channel
Display the status information of the call channel on
the specified subscriber line.
line-number
subscriber line number, the value range of it is decided
by the type and quantity of the voice cards actually put
into operation.
statistic
Display the statistics of the VCC module.
all
Display all the statistics of the VCC module.
error
Display the error statistics of the VCC module.
ipp
Display the statistics of the interaction messages
between the VCC module and the IPP module.
proc
Display the statistics of the interaction messages
between the VCC module and the system process.
rcv
Display the statistics of the interaction messages
between the VCC module and the RCV module.
timer
Display the statistics of the interaction messages
between the VCC module and the timer.
vpp
Display the statistics of the interaction messages
between the VCC module and the VPP module.
Default If it is required to display the status information of the call channel on the subscriber
line, but the parameter
line-number is not entered, the status information of all
voice subscriber-lines will be displayed by default.
Example Display the call status information of the 2VI board voice subscriber-line 1.
[Router] display voice vcc channel 1
!
GENERIC:
Index = 12
CallerNum = 100
CalledNum = 200
EncodeType = 729
PeerAddress = 127.0.0.1
DisconnectCause = 0
DisconnectText = Normal release
CallDuration = 00h 00m 17s
VoiceCallDuration = 00h 00m 17s